Name: | YCOB | Orientation Tolerence: | < 0.5° |
---|---|---|---|
Thickness/Diameter Tolerance: | ±0.05 Mm | Surface Flatness: | </8@632nm |
High Light: | zinc germanium phosphide,mgo linbo3 |
YCOB (YCa4O(BO3)3, Yttrium Calcium Oxyborate)—Nonlinear crystal considered to have good prospects of UV band optical frequency multiplier
One of the latest technical achievements connected with YCOB is the generation of 2.35-W CW green output (λ = 532 nm) in a 1.2-cm-long crystal (θ = 64.5◦, φ =35.5◦) via inter cavity SHG of a diode-array end-pumped Nd:YVO4 laser (P = 5.6W). Another similar application is THG of NdYVO4 laser radiation. Using the KTP crystal for frequency doubling and a 1.1-cm-longYCOB crystal (θ = 106◦, φ =77.2◦), the authors managed to obtain 124mW of quasi-CW light (pulse repetition frequency 20 kHz) at 355 nm.
YCOB crystal is one of the most widely used nonlinear optical crystals. Its nonlinear optical coefficient is equivalent to that of BBO crystal and LBO crystal. The effective frequency multiplication coefficients of the second and third order reach 2, 8 and 1, 4 times of KDP respectively.The YCOB crystal has the following advantages : large aperture, high damage intensity in femtosecond regime,about2000-2500GW/cm2 wide allowable Angle range and allowable temperature range,small dispersion Angle, shorter growth period by Cz method.At the same time, it has stable physical and chemical properties (non-deliquescent) and good machining properties. Therefore, it is considered to have good application prospects of blue-green light and UV band optical frequency multiplier crystal.
Features:
No deliquescence,;
Larger effective NLO susceptibilities;
Larger Temperature Acceptance;
High laser induce damage threshold;
Less parametric luminescence (three orders less);
Smaller thermal expansion coefficient and less anisotropy;
Very high electric resistivity
Applications
Second-harmonic generation (SHG);
Third-harmonic generation (THG);
Optical parametric oscillator (OPO)
Optical parametric amplification(OPA)
Optical parametric chirped-pulse amplification (OPCPA).
Piezoelectric devices
MetaLaser YCOB Crystals
Grown by CZ method;
Maximal Size: dia100mm
Custom design prouction is available
Specification
Polishing Specification for Laser Grade |
|
Orientation Tolerence |
< 0.5° |
Thickness/Diameter Tolerance |
±0.05 mm |
Surface Flatness |
</8@632nm |
Wavefront Distortion |
</4@632nm |
Surface Quality |
10/5 |
Parallel |
30 |
Perpendicular |
15 |
Clear Aperture |
>90% |
Chammfer |
<0.2×45° |
Crystal Properties |
|
Crystal Structure |
Monoclinic, Point group m |
Lattice Parameter |
a = 8.0770 , b = 16.0194 , c = 3.5308 , = 101.167, Z = 2 |
Melting Point |
About 1510 |
Mohs Hardness |
6 ~ 6.5 |
Density |
3.31 g/cm3 |
Thermal Conductivity |
2.6 W/m/K (X), 2.33 W/m/K (Y), 3.1 W/m/K (Z) |
Thermal Expansion Coefficient |
ax = 10.810-5/K, ay = -8.810-5/K, az = 3.410-5/K |
,
Phase Match Parameters |
|||
Application |
Theta |
Phi |
deff [pm/V] |
2nd Harmonic Generation (SHG) |
30.8° |
180° |
1.14 |
3rd Harmonic Generation (THG) |
106° |
77.2° |
NA |
Optical Parametric Amplifier (OPA) |
28° |
180° |
1.32 |